ROCKER OUTER PANEL(for 3 Door) CUT AND JOIN REPLACEMENT SECTIONS (SMALL AREAS)
Remove Weld Points
Cut and Join Location
25 mm (0.98 in.)
115 mm (4.53 in.)
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
ROCKER PANEL OUTER
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.