ACCELERATOR PEDAL SENSOR ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the power switch on (IG).

   3. Turn the GTS on.

   4. Enter the following menus: Powertrain / Hybrid Control / Data List / Accel Pedal Pos #1, Accel Pedal Pos #2.

   5. Read the Data List.

      Result

      Tester Display Accelerator Pedal Condition Specified Condition Accel Pedal Pos #1 Not depressed 8 to 28% Fully depressed 62 to 92% Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively Accel Pedal Pos #2 Not depressed 20 to 44% Fully depressed 78 to 100% Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively