OIL PAN INSTALLATION

PROCEDURE

  1. INSTALL TRANSAXLE OIL PAN SUB-ASSEMBLY

    C103348C01

    *1

    Magnet

    1. Install the 3 magnets to the oil pan.

    2. Install a new gasket to the oil pan.

    3. Install the oil pan to the continuously variable transaxle assembly with the 19 bolts.

      7.5 N*m

      76 kgf*cm

      66 in.*lbf

      Note:

      Completely remove any oil or grease from the contact surface of the transaxle case and oil pan sub-assembly with gasket before installation.

  2. INSTALL NO. 1 TRANSMISSION OIL FILLER TUBE

    1. Using a 6 mm socket hexagon wrench, install the No. 1 transmission oil filler tube to the oil pan.

      1.7 N*m

      17 kgf*cm

      15 in.*lbf

  3. ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID

    Click here

  4. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT LH

    Click here

  5. INSPECT FOR OIL LEAK

  6. INSTALL REAR ENGINE UNDER COVER LH

    Click here

  7. INSTALL NO. 1 ENGINE UNDER COVER

    Click here