OIL PUMP REASSEMBLY


  1. INSTALL OIL PUMP DRIVE GEAR


    1. A01E2NIE01

      Place the timing belt case on wooden blocks.

      Note

      Do not damage the timing pointer.

    2. A01E0CYE01

      Insert the drive and driven gears into the timing belt case with the marks facing the oil pump cover side.

    3. A01DYZGE01

      Apply adhesive to 2 or 3 threads of the screws.

      Adhesive
      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

    4. Install the oil pump cover with the 8 screws.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  2. INSTALL OIL PUMP RELIEF VALVE


    1. Insert the relief valve and spring into the installation hole of the timing belt case.

    2. A01DY2YE02

      Using a 12 mm hexagon wrench, install a new gasket and the plug.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }