СИСТЕМА ВПУСКА


  1. CONSTRUCTION


    1. A lightweight aluminum alloy is used for the intake manifold.

    2. This intake manifold consists of 2 pieces, the upper and lower, which are sealed with a rubber gasket and adhesive.

      A01KWVEC01
      *1 Intake Manifold Sub-assembly *2 Lower
      *3 Rubber Gasket *4 Upper
      *a Adhesive - -

      Tech Tips


      • Do not disassemble the upper and lower portions of the two-piece intake manifold, which are sealed with a rubber gasket and adhesive. To remove the intake manifold, remove the 10 bolts that are shown in the illustration.

      • These bolts have hexagon-shaped heads.

        A01KX28C01
        *1 Intake Manifold Sub-assembly *2 Hexagon-shaped Bolt