REAR DOOR LOCK INSPECTION

PROCEDURE

1. INSPECT REAR DOOR LOCK ASSEMBLY LH

   1. 

      *a	Unlock
      *b	Lock
      *c	Component without harness connected (Rear Door Lock Assembly LH)

      Check the operation of the door lock motor.

      1. Apply battery voltage and check the operation of the door lock motor.

         OK

         Battery Connection	Result
         Battery positive (+) → Terminal 4 (L) Battery negative (-) → Terminal 1 (UL)	Locks
         Battery positive (+) → Terminal 1 (UL) Battery negative (-) → Terminal 4 (L)	Unlocks

         If the result is not as specified, replace the rear door lock assembly LH.

   2. Check the operation of the unlock detection switch. (w/ Entry and Start System)

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance

         Tester Connection	Condition	Specified Condition
         6 (LSSR) - 9 (E)	Locked	10 kΩ or higher
         6 (LSSR) - 9 (E)	Unlocked	Below 1 Ω

         If the result is not as specified, replace the rear door lock assembly LH.

2. INSPECT REAR DOOR LOCK ASSEMBLY RH

   1. 

      *a	Unlock
      *b	Lock
      *c	Component without harness connected (Rear Door Lock Assembly RH)

      Check the operation of the door lock motor.

      1. Apply battery voltage and check the operation of the door lock motor.

         OK

         Battery Connection	Result
         Battery positive (+) → Terminal 4 (L) Battery negative (-) → Terminal 1 (UL)	Locks
         Battery positive (+) → Terminal 1 (UL) Battery negative (-) → Terminal 4 (L)	Unlocks

         If the result is not as specified, replace the rear door lock assembly RH.

   2. Check the operation of the unlock detection switch. (w/ Entry and Start System)

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance

         Tester Connection	Condition	Specified Condition
         6 (LSSR) - 9 (E)	Locked	10 kΩ or higher
         6 (LSSR) - 9 (E)	Unlocked	Below 1 Ω

         If the result is not as specified, replace the rear door lock assembly RH.