RADIO RECEIVER(for Radio Receiver Type) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY

    Click here

  2. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET


    1. B008M71

      Remove the 4 screws.

    2. Pull the radio receiver assembly with bracket toward the rear of the vehicle to disengage the guides.

    3. Disconnect each connector and remove the radio receiver assembly with bracket.

  3. REMOVE NO. 1 RADIO BRACKET


    1. A001UEM

      Remove the 3 screws and No. 1 radio bracket from the radio receiver assembly.

  4. REMOVE NO. 2 RADIO BRACKET


    1. A001TQO

      Remove the 3 screws and No. 2 radio bracket from the radio receiver assembly.