REAR SEAT INNER BELT ASSEMBLY INSTALLATION

PROCEDURE

  1. INSTALL REAR SEAT INNER BELT ASSEMBLY RH

    1. w/o Seat Belt Warning System:

      1. Install the rear seat inner belt assembly RH with the bolt.

        42 N*m

        428 kgf*cm

        31 ft.*lbf

    2. w/ Seat Belt Warning System:

      1. Install the rear seat inner belt assembly RH with the bolt.

        42 N*m

        428 kgf*cm

        31 ft.*lbf

      2. Attach the 2 wire harness clamps.

  2. INSTALL REAR CENTER SEAT LAP TYPE BELT ASSEMBLY RH

    1. B334903C01

      *1

      Protruding Part

      w/o Seat Belt Warning System:

      1. Install the rear center seat lap type belt assembly RH with the bolt.

        42 N*m

        428 kgf*cm

        31 ft.*lbf

        Note:

        The anchor part of the rear center seat lap type belt assembly RH must not overlap the protruding part.

    2. B334905C01

      *1

      Protruding Part

      w/ Seat Belt Warning System:

      1. Install the rear center seat lap type belt assembly RH with the bolt.

        42 N*m

        428 kgf*cm

        31 ft.*lbf

        Note:

        The anchor part of the rear center seat lap type belt assembly RH must not overlap the protruding part.

      2. Attach the wire harness clamp.

  3. INSTALL REAR SEAT ASSEMBLY RH

    Click hereClick here

  4. INSTALL REAR SEAT INNER BELT ASSEMBLY LH

    1. w/o Seat Belt Warning System:

      1. Install the rear seat inner belt assembly LH with the bolt.

        42 N*m

        428 kgf*cm

        31 ft.*lbf

    2. w/ Seat Belt Warning System:

      1. Install the rear seat inner belt assembly LH with the bolt.

        42 N*m

        428 kgf*cm

        31 ft.*lbf

      2. Attach the 2 wire harness clamps.

  5. INSTALL REAR CENTER SEAT LAP TYPE BELT ASSEMBLY LH

    1. B334899C01

      *1

      Protruding Part

      Pass the rear center seat lap type belt assembly LH through the rubber band of the separate type rear seat cushion cover.

    2. Install the rear center seat lap type belt assembly LH with the bolt.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

      Note:

      The anchor part of the rear center seat lap type belt assembly LH must not overlap the protruding part.

  6. INSTALL REAR SEAT ASSEMBLY LH

    Click hereClick here