DIESEL THROTTLE BODY INSTALLATION

PROCEDURE

1. INSTALL DIESEL THROTTLE BODY ASSEMBLY

   1. Install a new gasket and the diesel throttle body assembly with the 4 bolts.

      11 N*m

      112 kgf*cm

      8 ft.*lbf

   2. Engage the wire harness clamp and install the wire harness with the nut.

      8.4 N*m

      86 kgf*cm

      74 in.*lbf

   3. Connect the 2 connectors.

2. INSTALL NO. 2 AIR TUBE ASSEMBLY

   1. Install the No. 2 air tube assembly and tighten the 2 hose clamps.

   2. Install the 2 bolts.

      11 N*m

      112 kgf*cm

      8 ft.*lbf

   3. Connect the connector.

3. INSTALL NO. 3 AIR HOSE

   Click hereClick here

4. INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

   Click hereClick here

5. INSTALL NO. 1 ENGINE UNDER COVER

6. PERFORM INITIALIZATION

   Click here