REAR SHOCK ABSORBER INSPECTION

PROCEDURE


  1. INSPECT REAR SHOCK ABSORBER ASSEMBLY


    1. Compress and extend the rear shock absorber assembly rod 4 or more times.

      Standard
      When compressed and extended at a constant speed, the stroke of the shock absorber rod is smooth with no abnormal resistance or sounds. When extended, the shock absorber rod returns to its original position at a constant speed with no abnormal sounds.

      If there are any abnormalities, replace the rear shock absorber assembly with a new one.

    2. w/ AVS:


      1. A01OBOFC06
        *a Soft
        *b Medium
        *c Hard

        Check that there is a difference in the damping force when the rod is positioned as shown in the illustration.

        If there are any abnormalities, replace the rear shock absorber assembly with a new one.