LANE DEPARTURE ALERT SWITCH(for LHD) INSPECTION

PROCEDURE

  1. INSPECT TELLTALE LIGHT ASSEMBLY (LANE DEPARTURE ALERT SWITCH)

    1. B339082C01

      *a

      Component without harness connected

      (Telltale Light Assembly (Lane Departure Alert Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      6 (ECU) - 13 (E)

      LDA switch pushed

      Below 1 Ω

      6 (ECU) - 13 (E)

      LDA switch not pushed

      10 kΩ or higher

      If the result is not as specified, replace the telltale light assembly (lane departure alert switch).