OUTLINE
The theft deterrent system is controlled by the main body ECU. The theft deterrent system will operate when somebody attempts to forcibly enter the vehicle or open the engine hood, a battery cable is disconnected from a battery terminal* or when a battery cable is disconnected from a battery terminal and then reconnected.
*: Models with intrusion sensor
The system consists of door lock control system parts, entry and start system parts, an intrusion sensor, a security horn, a self-power siren, a print pattern type glass breakage sensor and a security indicator light.
The system is controlled by the main body ECU (multiplex network body ECU).
SPECIFICATION
The warning specifications of this system are listed below.
| Warning Method | Hazard Warning Lights | Flashes |
| Vehicle Horn (High Pitched Horn. Low Pitched Horn)*1 | Sounds a warning at approximately 0.4 seconds cycles | |
| Security Horn (Security Horn Assembly)*2 | Sounds | |
| Self-power Siren (Theft Warning Siren Assembly)*1 | Sounds | |
| Door Lock Motors | Locks | |
| Warning Time | Approximately 30 seconds | |
*1: Models with intrusion sensor
*2: Models without intrusion sensor