CAMSHAFT OIL CONTROL VALVE(for Bank 2) COMPONENTS
ILLUSTRATION
| *1 | FRONT FENDER APRON SEAL RH | - | - |
ILLUSTRATION
| *1 | CAMSHAFT TIMING GEAR BOLT (for Intake Side of Bank 2) | *2 | CAMSHAFT TIMING GEAR BOLT (for Exhaust Side of Bank 2) |
| *3 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 2) | *4 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 2) |
| *5 | O-RING | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Adhesive 1324 | ★ | Precoated part |
| *T1 | Type A: 120 N*m (1224 kgf*cm, 89 ft.*lbf) Type B: 95 N*m (969 kgf*cm, 70 ft.*lbf) |
- | - |