POWER WINDOW REGULATOR MOTOR ON-VEHICLE INSPECTION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front LH)

    A01E0TSE04

    1. Apply battery voltage to connector terminals 1 and 2.

      Note

      Do not apply battery voltage to any terminals except terminals 1 and 2.

    2. Check that the motor gear rotates smoothly as follows.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2

      Battery negative (-) → 1

      		 Motor gear rotates clockwise

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Motor gear rotates counterclockwise

      • If the result is not as specified, replace the power window regulator motor assembly.

  2. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front LH, w/Regulator)

    A01DXB0E01

    1. Apply battery voltage to connector terminals 1 and 2.

      Note

      Do not apply battery voltage to any terminals except terminals 1 and 2.

    2. Check that the arm of window regulator rotates smoothly as follows.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2

      Battery negative (-) → 1

      		 Arm of window regulator rotates clockwise (Up)

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Arm of window regulator rotates counterclockwise (Down)

      • If the result is not as specified, replace the power window regulator motor assembly.

  3. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front RH)

    A01DZEIE04

    1. Apply battery voltage to connector terminals 1 and 2.

      Note

      Do not apply battery voltage to any terminals except terminals 1 and 2.

    2. Check that the motor gear rotates smoothly as follows.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2

      Battery negative (-) → 1

      		 Motor gear rotates counterclockwise

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Motor gear rotates clockwise

      • If the result is not as specified, replace the power window regulator motor assembly.

  4. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Front RH, w/ Regulator)

    A01DX01E01

    1. Apply battery voltage to connector terminals 1 and 2.

      Note

      Do not apply battery voltage to any terminals except terminals 1 and 2.

    2. Check that the arm of window regulator rotates smoothly as follows.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2

      Battery negative (-) → 1

      		 Arm of window regulator rotates counterclockwise (Up)

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Arm of window regulator rotates clockwise (Down)

      • If the result is not as specified, replace the power window regulator motor assembly.

  5. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear LH)

    A01E0VWE04

    1. Apply battery voltage to connector terminals 1 and 2.

    2. Check that the motor gear rotates smoothly as follows.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Motor gear rotates clockwise

      Battery positive (+) → 2

      Battery negative (-) → 1

      		 Motor gear rotates counterclockwise

      • If the result is not as specified, replace the power window regulator motor assembly.

  6. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear LH, w/ Regulator)

    A01E306E01

    1. Apply battery voltage to connector terminals 1 and 2.

    2. Check that the arm of window regulator rotates smoothly as follows.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2

      Battery negative (-) → 1

      		 Arm of window regulator rotates clockwise (Up)

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Arm of window regulator rotates counterclockwise (Down)

      • If the result is not as specified, replace the power window regulator motor assembly.

  7. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear RH)

    A01DZWUE04

    1. Apply battery voltage to connector terminals 1 and 2.

    2. Check that the motor gear rotates smoothly as follows.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Motor gear rotates counterclockwise

      Battery positive (+) → 2

      Battery negative (-) → 1

      		 Motor gear rotates clockwise

      • If the result is not as specified, replace the power window regulator motor assembly.

  8. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear RH, w/ Regulator)

    A01E2A1E01

    1. Apply battery voltage to connector terminals 1 and 2.

    2. Check that the arm of window regulator rotates smoothly as follows.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 2

      Battery negative (-) → 1

      		 Arm of window regulator rotates counterclockwise (Up)

      Battery positive (+) → 1

      Battery negative (-) → 2

      		 Arm of window regulator rotates clockwise (Down)

      • If the result is not as specified, replace the power window regulator motor assembly.