PTC HEATER ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL QUICK HEATER ASSEMBLY


    1. B0085ZNC01
      B00847Z Install in this Direction

      Install the quick heater assembly as shown in the illustration.

  2. INSTALL NO. 2 HEATER COVER


    1. Engage each guide and claw.

    2. Install the No. 2 heater cover with the screw.

    3. Engage the clamp.

    4. Connect the 2 connectors.

  3. INSTALL NO. 1 AIR DUCT

    for Manual Tilt and Manual Telescopic Steering Column:

    Click here

    for Power Tilt and Power Telescopic Steering Column:

    Click here

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here