REAR NO. 2 SEAT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

  1. INSTALL REAR NO. 2 SEAT ASSEMBLY

    1. Place the rear No. 2 seat assembly in the cabin.

      Note:

      Be careful not to damage the vehicle body.

    2. Temporarily install the 2 bolts.

      B223228

    3. Pull the 2 straps and raise the 2 seatbacks.

    4. Temporarily install the 5 bolts.

      B223229

    5. Tighten the bolts in the order shown in the illustration.

      B221649E03

      37 N*m

      377 kgf*cm

      27 ft.*lbf

    6. Connect the connector under the seat.

  2. INSTALL REAR NO. 2 SEAT TRACK COVER

    1. B222863

      Attach the 2 guides and claw.

    2. Attach the 2 claws to install the cover.

  3. INSTALL REAR NO. 2 SEAT TRACK BRACKET COVER

    Tip:

    Use the same procedure to install the cover on the other side.

    1. B222861

      Attach the 2 claws to install the cover.

  4. INSTALL DECK TRIM SIDE BELT HOLE COVER RH

    Click hereClick here

  5. INSTALL DECK TRIM SIDE BELT HOLE COVER LH

    Click hereClick here

  6. INSTALL DECK FLOOR BOX RH

    Click hereClick here

  7. INSTALL DECK FLOOR BOX LH

    Click hereClick here

  8. INSTALL DECK RAIL COVER (w/o Spare Tire)

    Click hereClick here

  9. INSTALL LUGGAGE COMPARTMENT TRAY (w/ Spare Tire)

    Click hereClick here

  10. INSTALL DECK BOARD ASSEMBLY

    Click hereClick here

  11. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click hereClick here