FRONT SEAT SIDE AIRBAG ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

CAUTION:


  • Be sure to read Precaution thoroughly before servicing Click here.

  • Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

  • If the side airbag was deployed, replace the front seat airbag assembly, separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

    for Manual Seat: Click here

    for Power Seat: Click here

Tech Tips

Use the same procedures for the LH side and RH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY

    for Manual Seat: Click here

    for Power Seat: Click here

  2. DISCONNECT FRONT SEAT AIRBAG ASSEMBLY


    1. B005ZF8

      Disconnect the rubber band.

    2. B005XFI

      Disengage the claw and 4 clamps to disconnect the airbag wire harness.

    3. B005ZA6

      Disengage the fastener and separate the airbag wire harness.

    4. w/ Seat Heater System:


      1. Disengage the clamp and disconnect the seat heater wire harness.

  3. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Manual Seat)

    Click here

  4. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Power Seat)

    Click here

  5. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. B005YIA

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.