ECM REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation.

    Note

    When disconnecting the cable, systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    A01DY2GE01
    Text in Illustration
    *1 Stopper

    1. Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    2. A01DZ7ME01
      Text in Illustration
      *1 Hinge

      Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.

  3. REMOVE 4WD CONTROL ECU (for 4WD)


    1. A01DVIHE02

      Disconnect the connector.

    2. Remove the bolt and 4WD control ECU.

  4. REMOVE TURBO MOTOR DRIVER (for Motor Controlled Actuator)


    1. A01E1TLE03

      Disconnect the connector.

    2. Remove the bolt and turbo motor driver.

  5. REMOVE TRANSMISSION CONTROL ECU (for Automatic Transmission)


    1. Disconnect the 5 connectors.

      A01DZEAE01
      Text in Illustration
      *A for LHD *B for RHD

    2. Remove the 2 bolts and transmission control ECU.

  6. REMOVE ECM


    1. A01DZSME03

      Disconnect the 4 connectors.

    2. Remove the bolt, 2 nuts and ECM.

  7. REMOVE NO. 1 ECM BRACKET


    1. A01DYG4

      for LHD:

      Remove the 3 screws and bracket.

    2. A01DYBY

      for RHD:

      Remove the 3 screws and bracket.

  8. REMOVE NO. 2 ECM BRACKET


    1. A01E314

      for LHD:

      Remove the 2 screws and bracket.

    2. A01DYC9

      for RHD:

      Remove the 2 screws and bracket.