DIESEL THROTTLE BODY INSPECTION

PROCEDURE

  1. INSPECT DIESEL THROTTLE BODY ASSEMBLY

    1. Check that the there is no sludge accumulating around the diesel throttle body assembly.

      Note:

      When cleaning the diesel throttle body assembly, use a piece of cloth soaked with cleaning solvent. Spraying the solvent directly onto this part or soaking the part in solvent may damage it.

    2. A214409C03

      *a

      Component without harness connected (Diesel Throttle Body Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 (M-) - 2 (M+)

      20°C (68°F)

      0.3 to 100 Ω
      Note:

      Be sure to move the throttle valve when measuring the resistance.

      If the result is not as specified, replace the diesel throttle body assembly.