DOWNHILL ASSIST CONTROL SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL DOWNHILL ASSIST CONTROL SWITCH


    1. B0028YLC01
      B0069FO Install in this Direction

      Attach the 2 claws to install the downhill assist control switch to the lower instrument cover sub-assembly.

    2. Connect the downhill assist control switch connector.

  2. INSTALL LOWER INSTRUMENT COVER SUB-ASSEMBLY

    Click here

  3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  5. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  6. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  7. INSTALL LOWER STEERING COLUMN COVER

    Click here

  8. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)

    Click here

  9. INSTALL INTEGRATION PANEL SUB-ASSEMBLY (for Manual Cooler System)

    Click here

  10. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    Click here

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  12. CHECK SRS WARNING LIGHT

    Click here