WIRELESS DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System)

    Tip:

    The following items can be customized.

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    1. Customizing with the GTS

      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Wireless Door Lock.

      5. Select the setting by referring to the table below.

        Wireless Door Lock

        Tester Display

        Description

        Default

        Setting

        ECU

        Wireless Control

        Function that turns the wireless door lock control system on or off.

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Hazard Answer Back

        When the doors are locked by wireless operation, the hazard warning lights flash once.

        When the doors are unlocked by wireless operation, the hazard warning lights flash twice.

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Open Door Warning

        The buzzer sounds when lock is pressed when any of the doors are ajar.

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Unlock 2 Operation

        Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock.*1

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Panic Function

        Function to operate theft deterrent system by continuously pressing panic switch on electrical key transmitter sub-assembly for 0.8 seconds.*1

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Auto Lock Time

        Function that regulates the interval between unlocking and automatic relocking of doors.

        30 s

        00:30 s,01:60 s,10:120 s

        Main body ECU (Multiplex network body ECU)

        Wireless Buzzer Resp

        Wireless door lock buzzer response.*2

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Wireless Buzzer Vol

        Wireless door lock buzzer volume.*2

        Level 5*3

        Level 7*4

        0000:Level7,0001:Level6,0010:Level5,0011:Level4,0100:Level3,0101:Level2,0110:Level1,0111:Level0

        Main body ECU (Multiplex network body ECU)

        • *1: w/ Panic Switch

        • *2: w/ Wireless Door Lock Buzzer Answer Back Function

        • *3: w/ Power Back Door System

        • *4: w/o Power Back Door System

    2. Customizing with the display

      1. Turn the power switch on (IG).

      2. Enter the following menus: SET UP / Vehicle / Vehicle settings.

      3. Select the setting by referring to the table below.

        Display

        Default

        Content

        Setting

        Remote 2-Press Unlock*1

        On

        Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock.

        On or Off

        Lock/Unlock Feedback-Tone*2

        5*3

        7*4

        Wireless door lock buzzer volume

        off, 1, 2, 3, 4, 5, 6 or 7

        *1: w/ Panic Switch

        *2: w/ Wireless Door Lock Buzzer Answer Back Function

        *3: w/ Power Back Door System

        *4: w/o Power Back Door System