NAME PLATE(for Wagon) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Table 1. Heating Temperature

Item

Temperature

Vehicle Body

40 to 60°C (104 to 140°F)

Name Plate or Emblem

20 to 30°C (68 to 86°F)
Note:

Do not heat the vehicle body, name plates or emblem excessively.

PROCEDURE

  1. INSTALL NO. 1 BACK DOOR EMBLEM

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Clean off any tape adhesive residue with cleaner.

    2. Install a new No. 1 back door emblem.

      1. Using a heat light, heat the vehicle body and No. 1 back door emblem.

      2. Remove the release paper from the No. 1 back door emblem.

        Tip:

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 2 pins and install the No. 1 back door emblem.

        B350217C01

        *a

        Location pin

        -

        -

  2. INSTALL BACK DOOR NAME PLATE

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Clean off any tape adhesive residue with cleaner.

    2. Install a new back door name plate.

      1. Using a heat light, heat the vehicle body and back door name plate.

      2. Remove the release paper from the back door name plate.

        Tip:

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the back door name plate as shown in the illustration.

        B350218C01

        *a

        Profile of back door panel

        -

        -

        Reference Measurement

        Area

        Measurement

        A

        43.7 mm (1.72 in.)

        B

        155.3 mm (6.11 in.)

        C

        85.5 mm (3.37 in.)

        D

        104.3 mm (4.11 in.)

  3. INSTALL NO. 2 BACK DOOR NAME PLATE

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Clean off any tape adhesive residue with cleaner.

    2. Install a new No. 2 back door name plate.

      1. Using a heat light, heat the vehicle body and No. 2 back door name plate.

      2. Remove the release paper from the No. 2 back door name plate.

        Tip:

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 back door name plate as shown in the illustration.

        B350219C01

        *a

        Profile of back door panel

        -

        -

        Reference Measurement

        Area

        Measurement

        A

        102.7 mm (4.04 in.)

        B

        77.9 mm (3.07 in.)

        C

        38 mm (1.50 in.)

        D

        190 mm (7.48 in.)