WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System) CUSTOMIZE PARAMETERS
CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)
Tip:The following items can be customized.
Note:When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / Wireless Door Lock.
Select the setting by referring to the table below.
Wireless Door Lock
Tester Display
Description
Default
Setting
ECU
Wireless Control
Function that turns the wireless door lock control system on or off
ON
0:OFF,1:ON
Main body ECU (Multiplex network body ECU)
Hazard Answer Back
When the doors are locked by wireless operation, the hazard warning lights flash once.
When the doors are unlocked by wireless operation, the hazard warning lights flash twice.
ON
0:OFF,1:ON
Main body ECU (Multiplex network body ECU)
Trunk Lid Operation
Function to change the operation method of opening the back door by the door control transmitter assembly.
1tim ON: Push the back door open switch once
2tim ON: Push the back door open switch twice
Long1: Push the back door open switch for 0.8 seconds
Long2: Push the back door open switch for 1.6 seconds
Prohibit: Wireless back door open function is off
Long1
000:1tim ON,001:2tim ON,010:Long1,011:Long2,111:Prohibit
Main body ECU (Multiplex network body ECU)
Auto Lock Time
Function that regulates the interval between unlocking and automatic relocking of doors
30 s
00:30 s,01:60 s,10:120 s
Main body ECU (Multiplex network body ECU)