OIL PRESSURE SWITCH INSTALLATION

PROCEDURE

  1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

    1. A390612E01

      Apply adhesive to 2 or 3 threads of the oil pressure switch.

      Adhesive

      Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

      Table 1. Text in Illustration

      *1

      Adhesive
      Note:

      Do not let adhesive adhere to the oil hole.

    2. A153125

      Using a deep socket wrench, install the oil pressure switch.

      15 N*m

      153 kgf*cm

      11 ft.*lbf

      Note:

      Do not start the engine for at least 1 hour after installation.

    3. Connect the oil pressure switch connector.

  2. INSPECT FOR OIL LEAK

    Click here