HIGH MOUNTED STOP LIGHT ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL CENTER STOP LIGHT ASSEMBLY


    1. Clean off any tape adhesive residue from the vehicle body with cleaner.

    2. A01OASW

      Engage the guide to temporarily install the center stop light assembly as shown in the illustration.

      Note

      When installing the center stop light assembly, take care not to damage the back window glass sub-assembly and vehicle body.

    3. Attach the double-sided tape.

      Tech Tips

      Press the center stop light assembly firmly to attach the double-sided tape.

    4. Engage the 2 guides.

    5. Install the center stop light assembly with the 2 screws.

    6. Connect the connector.

    7. Engage the 4 clamps.

  2. INSTALL CENTER STOP LIGHT CLIP


    1. A01OD9QC01
      *a 90°

      Using a screwdriver, turn the center stop light clip 90 degrees to install the 2 center stop light clips.

  3. INSTALL NO. 2 CENTER STOP LIGHT COVER LH


    1. A01OCPT

      Engage the guide.

    2. Engage the 5 claws.

    3. Install the No. 2 center stop light cover LH with the screw.

  4. INSTALL NO. 2 CENTER STOP LIGHT COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  5. INSTALL CENTER STOP LIGHT COVER


    1. A01OBKV

      Engage the guide and claw to install the center stop light cover.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. Remove the protective tape.