INNER REAR VIEW MIRROR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the LHD and RHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. INSTALL INNER REAR VIEW MIRROR ASSEMBLY


    1. w/ Pre-collision System:


      1. B006G2JC01
        B006DHE Install in this Direction

        Slide the inner rear view mirror assembly as shown in the illustration to temporarily install the inner rear view mirror assembly.

      2. B006AT8C01
        B006AHR "TORX" Screw
        B006EC9 Connector

        Using a T20 "TORX" socket wrench, install inner rear view mirror assembly with the screw.

        Torque:
        1.7 N*m  { 17 kgf*cm, 15 in.*lbf }

      3. Connect the connector.

    2. w/o Pre-collision System:


      1. B006A2EC01
        B006DHE Install in this Direction

        Slide the inner rear view mirror assembly as shown in the illustration to temporarily install the inner rear view mirror assembly.

      2. B006C4X

        Using a T20 "TORX" socket wrench, install inner rear view mirror assembly with the screw.

        Torque:
        1.7 N*m  { 17 kgf*cm, 15 in.*lbf }
      3. B006B9T

        Connect the connector.

  2. INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)

    Click here

  3. INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)

    Click here

  4. INSTALL FRONT ROOF TOP GARNISH (w/ Pre-collision System)

    Click here

  5. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Pre-collision System)


    1. B006D57

      Attach the guide and temporarily install the inner rear view mirror stay holder cover.

    2. B006CJJ

      Slide the inner rear view mirror stay holder cover and attach the claw to install the inner rear view mirror stay holder cover.