ENGINE OIL TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

    Click here

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  4. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

    Click here

  5. REMOVE ENGINE OIL TEMPERATURE SENSOR


    1. B008913

      Disconnect the engine oil temperature sensor connector.

    2. B0083MIN01

      Using SST, remove the engine oil temperature sensor from the cylinder block sub-assembly.

      SST
      09817-33191

      Note

      If the engine oil temperature sensor has been struck or dropped, replace it.

    3. Remove the gasket from the engine oil temperature sensor.