POWER WINDOW CONTROL SYSTEM(for Models with Jam Protection Function on Driver Door Window Only) Jam Protection Function does not Operate

DTC Code DTC Name
Jam Protection Function does not Operate

DESCRIPTION

The jam protection function operates within a specified range during the manual up or auto up operation.

CAUTION / NOTICE / HINT

Note:

If the front door window regulator assembly (for driver door) has been replaced with a new one, initialize the power window control system.

Click here

PROCEDURE

  1. PERFORM INITIALIZATION (FOR DRIVER DOOR)

    1. Initialize the front door window regulator assembly (for driver door).

      Click here

    Result

    Proceed to

    NEXT
    NEXT

  2. CHECK POWER WINDOW CONTROL SYSTEM (AUTO UP/DOWN FUNCTION (FOR DRIVER DOOR))

    1. Check if the power window auto up and down function operates normally.

      Click hereClick here

      OK

      Driver door auto up and down function is normal.

    Result

    Proceed to

    OK

    NG
    NG

    GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table)

    Click hereClick here

    OK

  3. CHECK JAM PROTECTION FUNCTION OPERATING RANGE

    1. Check if the jam protection function operates normally for the driver door power window.

      Tip:

      The jam protection function will not operate within 4 mm (0.157 in.) of the fully closed position.

      OK

      Jam protection function operates normally.

    Result

    Proceed to

    OK

    NG
    OK

    END (PROBLEM DUE TO INITIALIZATION FAILURE)

    NG

    REPLACE FRONT DOOR WINDOW REGULATOR ASSEMBLY (FOR DRIVER DOOR)

    except Sedan:Click here

    for Sedan:Click here