FRONT SEAT INNER BELT ASSEMBLY(for Hatchback, Wagon) INSPECTION

PROCEDURE

  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (FOR DRIVER)

    1. B332789C01

      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (for Driver))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      2 - 3

      Driver seat belt unfastened

      Below 1 Ω

      2 - 3

      Driver seat belt fastened

      10 kΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly (for driver).

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY (FOR FRONT PASSENGER)

    1. B332790C01

      *A

      for LHD

      *B

      for RHD

      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (for Front Passenger))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Table 1. for LHD

      Tester Connection

      Condition

      Specified Condition

      L16-3 - B-1

      Always

      Below 1 Ω

      L16-2 - B-3

      Front passenger seat belt unfastened

      Below 1 Ω

      L16-2 - B-3

      Front passenger seat belt fastened

      10 kΩ or higher
      Table 2. for RHD

      Tester Connection

      Condition

      Specified Condition

      L15-3 - B-1

      Always

      Below 1 Ω

      L15-2 - B-3

      Front passenger seat belt unfastened

      Below 1 Ω

      L15-2 - B-3

      Front passenger seat belt fastened

      10 kΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly (for front passenger).