TIRE PRESSURE WARNING RECEIVER REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE ROOF HEADLINING ASSEMBLY


  4. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER


    1. B007SQ8

      Remove the 2 bolts.

    2. Detach the 2 guides to remove the tire pressure warning ECU and receiver.

    3. Disconnect the connector from the tire pressure warning ECU and receiver.