PANORAMIC MOON ROOF SYSTEM DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Sliding Roof or Main Body / Data List.

    5. Read the Data List according to the display on the GTS.


      Body Electrical > Sliding Roof > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Front SW Auto Operation Sliding roof glass auto operation function OFF or ON Customize setting displayed -
      Hall IC1 Pulse Hall IC1 pulse output Lo or Hi Lo and Hi repeat during motor operation

      Lo: Hall IC1 output is low

      Hi: Hall IC1 output is high
      Hall IC1 Status Status of Hall IC1 Normal or Error

      Normal: Hall IC1 normal

      Error: Hall IC1 not normal

      		 -
      Hall IC2 Pulse Hall IC2 pulse output Lo or Hi Lo and Hi repeat during motor operation

      Lo: Hall IC2 output is low

      Hi: Hall IC2 output is high
      Hall IC2 Status Status of Hall IC2 Normal or Error

      Normal: Hall IC2 normal

      Error: Hall IC2 not normal

      		 -
      Ignition (MPX) Engine switch signal (LIN signal) OFF or ON

      OFF: Engine switch off

      ON: Engine switch on (IG)

      		 -
      Door Courtesy Front door courtesy light switch assembly LH signal OFF or ON

      OFF: Driver door closed

      ON: Driver door open

      		 -
      Door Key Close Operation Key-linked sliding roof glass close signal OFF or ON

      OFF: Driver door key cylinder not turned

      ON: Driver door key cylinder turned and held at the lock position

      		 -
      Door Key Open Operation Key-linked sliding roof glass open signal OFF or ON

      OFF: Driver door key cylinder not turned

      ON: Driver door key cylinder turned and held at the unlock position

      		 -
      Wireless Open Operation Wireless transmitter-linked sliding roof glass open signal OFF or ON

      OFF: Transmitter UNLOCK switch not pressed

      ON: Transmitter UNLOCK switch pressed and held

      		 -
      Key Off Permission Key-off sliding roof glass operation permit signal OFF or ON

      OFF: Any status except "ON" status

      ON: Front doors are not opened within 45 seconds after engine switch turned off

      		 -
      Vent Switch TILT switch signal OFF or ON

      OFF: Tilt switch not pressed

      ON: Tilt switch pressed

      		 -
      Roof Open Switch OPEN switch signal OFF or ON

      OFF: Slide switch (OPEN) not pressed

      ON: Slide switch (OPEN) pressed

      		 -
      Roof Close Switch CLOSE switch signal OFF or ON

      OFF: Slide switch (CLOSE) not pressed

      ON: Slide switch (CLOSE) pressed

      		 -
      Current Roof Open Switch Stuck ON Sliding roof glass open switch stuck signal (Current) OFF or ON

      OFF: No sliding roof switch stuck signal (Current)

      ON: Sliding roof switch stuck signal (Current)

      		 -
      Current Roof Close Switch Stuck ON Sliding roof glass close switch stuck signal (Current) OFF or ON

      OFF: No sliding roof switch stuck signal (Current)

      ON: Sliding roof switch stuck signal (Current)

      		 -
      Current Shade Close Switch Stuck ON Roof sunshade close switch stuck signal (Current) OFF or ON

      OFF: No roof sunshade switch stuck signal (Current)

      ON: Roof sunshade switch stuck signal (Current)

      		 -
      Current Shade Open Switch Stuck ON Roof sunshade open switch stuck signal (Current) OFF or ON

      OFF: No roof sunshade switch stuck signal (Current)

      ON: Roof sunshade switch stuck signal (Current)

      		 -
      Past Roof Open Switch Stuck ON Sliding roof glass open switch stuck signal (Past) OFF or ON

      OFF: No sliding roof switch stuck signal (Past)

      ON: Sliding roof switch stuck signal (Past)

      		 -
      Past Roof Close Switch Stuck ON Sliding roof glass close switch stuck signal (Past) OFF or ON

      OFF: No sliding roof switch stuck signal (Past)

      ON: Sliding roof switch stuck signal (Past)

      		 -
      Past Shade Close Switch Stuck ON Roof sunshade close switch stuck signal (Past) OFF or ON

      OFF: No roof sunshade switch stuck signal (Past)

      ON: Roof sunshade switch stuck signal (Past)

      		 -
      Past Shade Open Switch Stuck ON Roof sunshade open switch stuck signal (Past) OFF or ON

      OFF: No roof sunshade switch stuck signal (Past)

      ON: Roof sunshade switch stuck signal (Past)

      		 -
      Current Vent Switch Stuck ON Sliding roof glass tilt switch stuck signal (Current) OFF or ON

      OFF: No sliding roof switch stuck signal (Current)

      ON: Sliding roof switch stuck signal (Current)

      		 -
      Past Vent Switch Stuck ON Sliding roof glass tilt switch stuck signal (Past) OFF or ON

      OFF: No sliding roof switch stuck signal (Past)

      ON: Sliding roof switch stuck signal (Past)

      		 -
      Suggestion Service Function Availability of suggestion function OFF or ON

      OFF: w/o Suggestion function

      ON: w/ Suggestion function

      		 -
      Number of Trouble Codes Number of trouble codes Min.: 0 to Max.: 255 Number of DTCs is displayed -

      Body Electrical > Main Body > Data List
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      IG SW Engine switch status OFF or ON

      OFF: Engine switch off

      ON: Engine switch on (IG)

      		 "OFF" is displayed even though the engine switch is on (ACC).
      FL Door Courtesy SW Front door courtesy light switch assembly LH signal OFF or ON

      OFF: Front door LH closed

      ON: Front door LH open

      		 -
      Slide Roof Open Warning Sliding roof glass open warning OFF or ON Customize setting displayed -
      Communication Slide Roof Connection status between sliding roof drive gear sub-assembly (sliding roof ECU) and main body ECU (multiplex network body ECU) STOP or OK

      STOP: Communication stopped

      OK: Normal communication

      		 -
      Communication Sliding Sunshade ECU Connection status between sliding roof drive gear assembly (roof sunshade ECU) and main body ECU (multiplex network body ECU) STOP or OK

      STOP: Communication stopped

      OK: Normal communication

      		 -
      The Number of DTC Number of trouble codes Min.: 0 to Max.: 255 Number of DTCs is displayed -

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Sliding Roof / Active Test.

    5. Perform the Active Test according to the display on the GTS.


      Body Electrical > Sliding Roof > Active Test
      Tester Display Measurement Item Control Range Diagnostic Note
      Slide Roof Operate slide motor OFF / Opn/Dwn / Clos/Up -