HIGH MOUNTED STOP LIGHT ASSEMBLY INSPECTION

PROCEDURE

  1. INSPECT CENTER STOP LIGHT ASSEMBLY

    1. E269062C01

      *a

      Component without harness connected

      (Center Stop Light Assembly)

      Apply battery voltage to the connector and check the light illumination condition.

      OK

      If the result is not as specified, replace the center stop light assembly LH.

      Condition

      Specified Condition

      Battery positive (+) → Terminal 2 (B)

      Battery negative (-) → Terminal 1 (E)

      Illuminates

      If the result is not as specified, replace the center stop light assembly.