REAR SEAT ASSEMBLY(for LH Side) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seatback frame, seat cushion frame and reclining adjuster may injure your hands.

PROCEDURE

  1. REMOVE REAR SEAT HEADREST ASSEMBLY

  2. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY

  3. REMOVE REAR CENTER SEAT LAP TYPE BELT ASSEMBLY LH

    Click here

  4. REMOVE CENTER ARMREST HINGE COVER RH

    1. Return the seatback to the upright position.

    2. B336607

      Detach the clamp to remove the center armrest hinge cover RH.

  5. REMOVE REAR SEAT NO. 3 CUSHION HINGE COVER

    1. B336608

      Detach the clamp.

    2. B336609

      Using a screwdriver, detach the 4 claws and clamp to remove the rear seat No. 3 cushion hinge cover.

      Tip:

      Tape the screwdriver tip before use.

  6. REMOVE REAR SEAT LOWER CUSHION HINGE COVER LH

    B336610

    1. Using a screwdriver, detach the 4 claws and clamp to remove the rear seat lower cushion hinge cover LH.

      Tip:

      Tape the screwdriver tip before use.

  7. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY

    1. B336611

      Remove the bolt, washer and rear seat center armrest assembly.

  8. REMOVE REAR SEAT NO. 1 CENTER ARMREST PLATE

    1. B336612

      Remove the rear seat No. 1 center armrest plate.

  9. REMOVE REAR SEATBACK NO. 1 BOARD CAP

    1. B336613C01

      *1

      Protective Tape

      Using a screwdriver, detach the 3 claws to remove the rear seatback No. 1 board cap.

      Tip:

      Tape the screwdriver tip before use.

  10. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

    1. B336614

      Remove the 3 screws and reclining adjuster release handle LH.

  11. REMOVE REAR NO. 1 SEAT CUSHION ASSEMBLY LH

    1. B336615

      Remove the 2 bolts and 2 bushes and lift up the cushion as shown in the illustration.

    2. B336616E01

      Detach the clamp of the cable end.

    3. Disconnect the cable in the order shown in the illustration.

    4. B336617

      Remove the 3 clamps.

    5. B336618C01

      *1

      Protective Tape

      Using a screwdriver, detach the 2 claws to remove the rear seatback cover.

      Tip:

      Tape the screwdriver tip before use.

    6. B340573

      Remove the 2 bolts, 2 bushes and rear No. 1 seat cushion assembly LH.

  12. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER

    1. B340574

      Detach the 20 hooks and remove the separate type seat cushion cover (with pad) from the rear seat spring assembly LH.

    2. B340575

      Remove the 5 hog rings.

    3. B340576

      Remove the 13 hog rings and separate type rear seat cushion cover from the rear seat cushion pad LH.

  13. REMOVE REAR SEAT CUSHION MOULDING LH

    1. B340577

      Detach the claw and 3 hooks to remove the rear seat cushion moulding LH.

  14. REMOVE REAR SEAT COVER LH

    1. B340578

      Remove the clip and screw.

    2. Using a screwdriver, detach the claw to remove the rear seat cover LH.

  15. REMOVE REAR SEATBACK COVER LH

    1. B340579

      Remove the clip and screw.

    2. Using a screwdriver, detach the claw to remove the rear seatback cover LH.

  16. REMOVE REAR SEAT REAR CUSHION MOULDING LH

    B340580

    1. w/ Seat Belt Warning System:

      Detach the 2 clamps.

    2. Detach the claw and clamp to remove the rear seat rear cushion moulding LH.

  17. REMOVE NO. 2 SEAT ADJUSTER CONTROL CABLE ASSEMBLY

    B340581E01

    1. Detach the 4 clamps.

    2. Detach the 2 clamps of the cable end.

    3. Disconnect the 2 cables in the order shown in the illustration and remove the No. 2 seat adjuster control cable.

  18. REMOVE REAR SEAT INNER BELT ASSEMBLY LH

    1. B340582

      Remove the bolt and rear seat inner belt assembly.

  19. REMOVE REAR NO. 1 SEATBACK ASSEMBLY LH

    1. B340583

      Remove the 3 bolts and rear No. 1 seatback assembly LH from the rear seat reclining adjuster assembly LH.

  20. REMOVE REAR SEATBACK BOARD LH

    1. B340584

      Remove the 6 hog rings and detach the 2 pieces of fastening tape.

    2. B340585

      Detach the 7 claws and clamp to remove the rear seatback board assembly LH.

  21. REMOVE SEPARATE TYPE REAR SEATBACK COVER

    1. B340586

      Detach the 8 claws to remove the 4 rear seat headrest supports.

    2. B340587

      Detach the 9 clamps.

    3. Remove the separate type rear seatback cover (with pad) from the rear seatback frame sub-assembly LH.

    4. B340588

      Remove the 5 hog rings.

    5. B340589

      Remove the 11 hog rings and separate type rear seatback cover from the separate type rear seatback pad.