METER / GAUGE SYSTEM OPERATION CHECK

INSPECT INDICATOR/WARNING LIGHT

1. Check the following indicators and warning lights.

   Indicator/Warning Light	Switch Condition	Specified Condition
   ABS warning light	Ignition switch off → ON	Comes on for 3 seconds
   Slip indicator light
   AFS OFF indicator light (w/ AFS)
   Parking brake warning light
   Brake warning light (Yellow indicator)
   Brake warning light (Red indicator)
   VSC OFF indicator light
   Stop and start indicator light
   Stop and start cancel indicator light
   Tire pressure warning light (w/ Tire Pressure Warning System)
   SRS warning light	Ignition switch off → ON	Comes on for 6 seconds
   Charge warning light	Ignition switch off → ON	Illuminates when ignition switch turned to ON Turns off when engine started
   EPS warning light
   MIL (Malfunction indicator lamp)

CHECK SPEEDOMETER

1. Connect the GTS to the DLC3.

2. Turn the ignition switch to ON.

3. Turn the GTS on.

4. Enter the following menus: Powertrain / ABS/VSC/TRC / Data List.

   If the result is not as specified, the speedometer may have a malfunction.

   Note

   Do not use worn, underinflated or overinflated tires, as the speedometer reading will be inaccurate.

   Check the deflection width of the speedometer indicator.

   CHECK TACHOMETER

   
   

   1. Connect a tune-up tachometer and start the engine.

   2. Compare the test results with the tachometer indicator.

   DC 13.5 V at 25°C (77°F)

   Standard Indication (rpm)	Acceptable Range Data in ( ) is for Reference (rpm)
   700	630 to 770
   1000	(900 to 1100)
   2000	(1850 to 2150)
   3000	2800 to 3200
   4000	(3800 to 4200)
   5000	4800 to 5200
   6000	(5750 to 6250)
   7000	6700 to 7300