REAR CENTER SEAT ASSEMBLY(for Rear No. 1 Seat) DISASSEMBLY

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

   1. Remove the rear center seat headrest assembly.

2. REMOVE REAR SEAT TRACK COVER LH

   1. 

      Detach the 2 claws and clip, and then remove the rear seat track cover LH.

3. REMOVE REAR SEAT INNER BELT ASSEMBLY (for LH Side)

   Click here

4. REMOVE REAR SEAT NO. 2 LEG SIDE COVER

   

   1. Remove the 2 screws.

   2. Pull the cover to detach the 2 hooks labeled A.

   3. Slide the cover to detach the hook labeled B and remove the rear seat No. 2 leg side cover.

      Table 1. Text in Illustration

      *1	Hook A
      *2	Hook B

5. REMOVE REAR SEAT INNER BELT ASSEMBLY (for RH Side)

   Click here

6. REMOVE REAR SEAT LEG SIDE COVER

   

   1. Remove the 2 screws.

   2. Pull the cover to detach the 2 hooks labeled A.

   3. Slide the cover to detach the hook labeled B and remove the rear seat leg side cover.

      Table 2. Text in Illustration

      *1	Hook A
      *2	Hook B

7. REMOVE REAR CENTER SEAT CUSHION COVER WITH PAD

   1. Detach the 4 hooks and open the cover.

      

   2. Detach the 2 seatback cover rubber bands.

   3. Pull the 2 seatback cover rubber bands through the 2 seat cushion cover rubber bands.

      

      Table 3. Text in Illustration

      *1

      Seatback Cover Rubber Band

      *2

      Seat Cushion Cover Rubber Band

   4. 

      Detach the rubber band.

   5. 

      Remove the hog rings and roll up the center seat cushion cover sub-assembly.

   6. 

      Detach the 5 hooks and remove the rear center seat cushion cover with pad.

8. REMOVE CENTER SEAT CUSHION COVER SUB-ASSEMBLY

   1. 

      Remove the hog rings.

   2. 

      Remove the hog rings and center seat cushion cover sub-assembly from the rear center seat cushion pad.

9. REMOVE REAR CENTER BACK LOCK CONTROL LEVER

   1. 

      Remove the screw and detach the 2 claws.

   2. 

      Detach the 2 clamps of the cable ends.

   3. Disconnect the 2 cables in the order shown in the illustration and remove the rear center back lock control lever.

10. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY

    1. 

       Detach the 4 hooks.

    2. 

       Detach the 4 claws.

    3. Detach the 2 hooks and remove the rear seatback board sub-assembly.

11. REMOVE REAR CENTER SEAT ARMREST ASSEMBLY

    1. 

       Remove the 2 nuts and rear center seat armrest assembly.

12. REMOVE REAR SEATBACK HINGE COVER

    1. 

       Remove the 2 bolts together with the 2 bushes.

    2. Remove the rear seatback hinge cover with rear center No. 1 armrest bracket.

    3. 

       Detach the 3 claws and remove the rear seatback hinge cover from the rear center No. 1 seat armrest bracket.

13. REMOVE REAR SEAT HEADREST SUPPORT

    1. 

       Detach the 4 claws and remove the 2 rear seat headrest supports.

14. REMOVE REAR SEATBACK WITH COVER PAD SUB-ASSEMBLY

    1. 

       Detach the 2 hooks.

    2. 

       Remove the rear seatback with cover pad sub-assembly.

15. REMOVE CENTER SEAT CUSHION FRAME SUB-ASSEMBLY

    1. 

       Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts together with the 2 spacers.

    2. Remove the 2 bolts and center seat cushion frame sub-assembly.

16. REMOVE NO. 1 REAR SEAT LOCK CONTROL CABLE

    

    1. Cut off the cable tie.

    2. Detach the clamp of the cable end.

       Table 4. Text in Illustration

       *1	Cable Tie
       *2	Clamp

    3. Remove the No. 1 rear seat lock control cable in the order shown in the illustration.

17. REMOVE NO. 2 REAR SEAT LOCK CONTROL CABLE

    

    1. Detach the clamp of the cable end.

    2. Remove the No. 2 rear seat lock control cable in the order shown in the illustration.

18. REMOVE REAR CENTER NO. 1 SEATBACK FRAME SUB-ASSEMBLY

    1. 

       Remove the 4 bolts and rear center No. 1 seatback frame sub-assembly.