VACUUM WARNING SWITCH(for LHD) INSTALLATION

PROCEDURE

1. INSTALL VACUUM WARNING SWITCH ASSEMBLY

   
   

   1. Install a new check valve grommet to the brake booster assembly.

   2. 

      *a	63° +/- 4°
      *b	Up

      Install the vacuum warning switch assembly to the brake booster assembly as shown in the illustration.

   3. Connect the connector to the vacuum warning switch assembly.

2. REMOVE BATTERY

   Click here

3. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY

   Click here

4. INSTALL COWL BODY MOUNTING REINFORCEMENT RH

   Click here

5. INSTALL COWL BODY MOUNTING REINFORCEMENT LH

   Click here

6. INSTALL WATER GUARD PLATE LH

   Click here

7. INSTALL NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL

   Click here

8. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here