OIL COOLER INSTALLATION

INSTALL TRANSMISSION OIL COOLER

Install the No. 8 water by-pass hose and No. 9 water by-pass hose, and slide the clips to secure it.

Note:

Make sure the paint marks are aligned as shown in the illustration.
Make sure that the claws marked A in the illustration are facing toward the top of the vehicle.
Make sure that the claws marked B in the illustration are facing toward the LH of the vehicle.
Make sure that the claws marked C in the illustration are facing toward the front end of the vehicle.
Make sure that the claws marked D in the illustration are facing toward the underside of the vehicle.

Attach the 3 clamp to the No. 8 water by-pass hose and No. 9 water by-pass hose.

Install the oil cooler inlet hose and oil cooler outlet hose, and slide the clips to secure it.

Note:

Make sure the paint marks are aligned as shown in the illustration.
Make sure that the claws marked A in the illustration are facing toward the front end of the vehicle.
Position the claws of the clips so that they do not interfere with other parts unless otherwise specified.

INSTALL BATTERY BRACKET REINFORCEMENT

INSTALL FRONT BATTERY BRACKET

INSTALL BATTERY TRAY

INSTALL BATTERY

INSTALL BATTERY INSULATOR

INSTALL BATTERY CLAMP SUB-ASSEMBLY

CONNECT CABLE TO POSITIVE BATTERY TERMINAL

CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Note:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here Click here Click here Click here Click here Click here).

ADD AUTOMATIC TRANSAXLE FLUID

ADD ENGINE COOLANT

INSPECT FOR COOLANT LEAK

ADJUST AUTOMATIC TRANSAXLE FLUID