METER / GAUGE SYSTEM INITIALIZATION

  1. MAINTENANCE REQUIRED REMINDER RESET PROCEDURE

    1. for Multi-information Display (Segment LCD Type)

      1. Turn the ignition switch to ON.

      2. Press the ODO/TRIP DISP switch knob until the TRIP A meter appears.

      3. Turn the ignition switch off.

      4. Turn the ignition switch to ON while pressing and holding the ODO/TRIP DISP switch knob. Hold the ODO/TRIP DISP switch knob until the following conditions are met and 5 seconds have elapsed.

      5. The TRIP A meter shows "000000".

      6. The oil maintenance warning light goes off.

    2. for Multi-information Display (Dot LCD Type)

      1. Turn the ignition switch to ON.

      2. Press the ODO/TRIP switch knob until the TRIP A meter appears.

      3. Turn the ignition switch off.

      4. Turn the ignition switch to ON while pressing and holding the ODO/TRIP switch knob. Hold the ODO/TRIP switch knob until the following conditions are met and 5 seconds have elapsed.

      5. The TRIP A meter shows "000000".

      6. The multi-information display shows that the reset is complete.

    3. for Multi-information Display (Color Type)

      1. Turn the ignition switch to ON.

      2. Press the TRIP switch until the TRIP A meter appears.

      3. Turn the ignition switch off.

      4. Turn the ignition switch to ON while pressing and holding the TRIP switch. Hold the TRIP switch until the following conditions are met and 5 seconds have elapsed.

      5. The TRIP A meter shows "000000".

      6. The multi-information display shows that the reset is complete.