TIRE PRESSURE WARNING RECEIVER INSTALLATION

INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER
1. Connect the connector to the tire pressure warning ECU and receiver.
2. Attach the 2 guides to temporarily install the tire pressure warning ECU and receiver.
3. Install the 2 bolts.
  
  Torque:
  
  8.5 N*m { 87 kgf*cm, 75 in.*lbf }
INSTALL ROOF HEADLINING ASSEMBLY
- for Semi-trim: Click here
- for Full-trim: Click here
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Note

When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REGISTRATION OF TRANSMITTER ID

Click here
INSPECT TIRE PRESSURE WARNING SYSTEM

Click here
PERFORM INITIALIZATION

Click here