WASHER NOZZLE(for Rear Side) ON-VEHICLE INSPECTION

PROCEDURE


  1. INSPECT REAR WASHER NOZZLE


    1. With the power switch on (IG), check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

      Standard
      Washer fluid hits the windshield in the area shown in the illustration.
      A005DRJE03
      Standard Clearance
      Area Measurement
      A 12.5 mm (0.492 in.)
      B 2.5 mm (0.0984 in.)
      C 25.7 mm (1.01 in.)
      D 47.8 mm (1.88 in.)

      Tech Tips

      If the result is not as specified, replace the malfunctioning rear washer nozzle.