NAME PLATE(for Wagon) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Table 1. Heating Temperature

Item

Temperature

Vehicle Body

40 to 60°C (104 to 140°F)

Name Plate or Emblem

20 to 30°C (68 to 86°F)
Note:

Do not heat the vehicle body, name plates or emblem excessively.

PROCEDURE

  1. INSTALL NO. 1 BACK DOOR EMBLEM

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new No. 1 back door emblem.

    3. Remove the release paper from the No. 1 back door emblem.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Engage the 2 pins and install the No. 1 back door emblem as shown in the illustration.

      B411081C01

      *a

      Location Pin

      -

      -

  2. INSTALL BACK DOOR NAME PLATE

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new back door name plate.

    3. Remove the release paper from the back door name plate.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the back door name plate as shown in the illustration.

      B411082C01

      *a

      Profile of Back Door Panel

      -

      -

      Standard Measurement

      Area

      Measurement

      Area

      Measurement

      A

      43.7 mm (1.72 in.)

      B

      155.3 mm (6.11 in.)

      C

      85.5 mm (3.37 in.)

      D

      104.3 mm (4.11 in.)

  3. INSTALL NO. 2 BACK DOOR NAME PLATE

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new No. 2 back door name plate.

    3. Remove the release paper from the No. 2 back door name plate.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. w/o Back Door Name Plate:

      1. Install the No. 2 back door name plate as shown in the illustration.

        B463250C01

        *a

        Profile of Back Door Panel

        -

        -

        Standard Measurement

        Area

        Measurement

        Area

        Measurement

        A

        35.1 mm (1.38 in.)

        B

        187.2 mm (7.37 in.)

        C

        74.0 mm (2.91 in.)

        D

        104.3 mm (4.11 in.)

    5. w/ Back Door Name Plate:

      1. Install the No. 2 back door name plate as shown in the illustration.

        B411083C01

        *a

        Profile of Back Door Panel

        -

        -

        Standard Measurement

        Area

        Measurement

        Area

        Measurement

        A

        102.7 mm (4.04 in.)

        B

        77.9 mm (3.07 in.)

        C

        38.0 mm (1.50 in.)

        D

        190.0 mm (7.48 in.)