INTAKE AIR TEMPERATURE SENSOR REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click hereClick here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick here

  3. REMOVE BATTERY

  4. REMOVE INTAKE AIR TEMPERATURE SENSOR

    1. A315745

      Disconnect the intake air temperature sensor connector.

    2. A354292C01

      *a

      45°

      Rotate the intake air temperature sensor 45° counterclockwise and remove it.

      Note:

      If the intake air temperature sensor has been struck or dropped, replace it.