BRAKE ACTUATOR REASSEMBLY

PROCEDURE

  1. INSTALL BRAKE ACTUATOR BRACKET CUSHION

    1. Install the 3 brake actuator bracket cushions to the brake actuator bracket.

  2. INSTALL BRAKE ACTUATOR CASE COLLAR

    1. Install the 3 brake actuator case collars to the brake actuator bracket cushions.

  3. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY

    1. Install the brake actuator bracket to the brake actuator with the bolt and 2 new nuts. Tighten the 2 nuts and bolt uniformly in alphabetical order.

      C225642E02
      Table 1. Text in Illustration

      *A

      except CVT

      *B

      for CVT

      for bolt

      5.4 N*m

      55 kgf*cm

      48 in.*lbf

      for nut

      7.5 N*m

      76 kgf*cm

      66 in.*lbf

      Note:

      Do not remove the hole plugs before installing a new brake actuator because the brake actuator is filled with brake fluid.