SIDE TURN SIGNAL LIGHT ASSEMBLY (for Outer Rear View Mirror) INSTALLATION

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. Connect the connector.

    2. Install the side turn signal light assembly LH with the 2 screws.

  2. INSTALL OUTER MIRROR COVER LH


    1. A01DWT6E02

      Attach the 3 claws as shown in the illustration.

    2. Attach the 6 claws to install the mirror cover LH.

    3. A01DV7EE01

      After installing the outer mirror cover, check that there is no gap between the cover and mirror body.

      Tech Tips

      If there is a gap between the cover and body, noise will occur during driving.

  3. INSTALL OUTER MIRROR LH

    A01DVXG

    1. Install the outer rear view mirror assembly LH with the 3 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 ft.*lbf }

    2. w/ Power Mirror Control System:

      Connect the connector.

  4. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH

    Click here