BACK DOOR(for Hatchback) REASSEMBLY

PROCEDURE

  1. INSTALL BACK DOOR DAMPER STAY UPPER BRACKET LH

    Click hereClick here

  2. INSTALL BACK DOOR DAMPER STAY UPPER BRACKET RH

    Tip:

    Use the same procedure as for the LH side.

  3. INSTALL BACK DOOR STAY ASSEMBLY LH

    Click hereClick here

  4. INSTALL BACK DOOR STAY ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  5. INSTALL REAR WIPER MOTOR GROMMET (w/ Rear Wiper)

    Click here

  6. INSTALL REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)

    Click here

  7. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper)

    Click here

  8. INSTALL REAR WIPER ARM HEAD CAP (w/ Rear Wiper)

    Click here

  9. INSTALL BACK DOOR PANEL CUSHION

    1. B327788

      Engage the 2 claws to install the 2 new back door panel cushions.

  10. INSTALL REAR TELEVISION CAMERA ASSEMBLY (w/ Rear View Monitor System)

    Click here

  11. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click hereClick here

  12. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

    Click here

  13. INSTALL REAR LIGHT ASSEMBLY LH

    Click hereClick hereClick here

  14. INSTALL REAR LIGHT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  15. INSTALL BACK DOOR LOCK ASSEMBLY

    Click here

  16. INSTALL BACK DOOR PANEL NO. 2 PROTECTOR (w/ Back Door Panel Protector)

    1. Clean the back door panel sub-assembly.

    2. Remove the release paper from a new back door panel No. 2 protector.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. B327787C03

      *a

      Double-sided Tape

      Engage the 2 clips and install the new back door panel No. 2 protector.

  17. INSTALL BACK DOOR PANEL NO. 1 PROTECTOR (w/ Back Door Panel Protector)

    Tip:

    Use the same procedure as for the LH side.

  18. INSTALL BACK DOOR TRIM PANEL ASSEMBLY

    1. B327786C04

      *a

      Clip <A>

      Engage the 12 clips to install the back door trim panel assembly.

    2. Install the clip <A>.

  19. INSTALL DOOR PULL HANDLE

    1. B327785

      Engage the 4 claws to install the door pull handle.

      Tip:

      With the back door fully open, install the door pull handle so that the arrow on the backside of door pull handle points up.

  20. INSTALL BACK DOOR SIDE GARNISH LH (w/ Back Door Side Garnish)

    1. B327781

      Engage the 2 clips and 2 claws, and install the back door side garnish LH.

    2. B327783C02

      *a

      Guide

      Align the guide with the cutout, engage the 2 claws, and install the package tray trim garnish hook.

    3. B327779

      Engage the pin.

  21. INSTALL BACK DOOR SIDE GARNISH RH (w/ Back Door Side Garnish)

    Tip:

    Use the same procedure as for the LH side.

  22. INSTALL REAR WASHER NOZZLE (w/ Rear Wiper)

    Click here

  23. INSPECT REAR WASHER NOZZLE (w/ Rear Wiper)

    Click here

  24. ADJUST REAR WASHER NOZZLE (w/ Rear Wiper)

    Click here

  25. INSTALL STOP CENTER BRACKET

    1. E260185

      Engage the 2 clips and install the 2 stop center brackets.

    2. E260184

      Install the 2 screws.

  26. INSTALL CENTER STOP LIGHT ASSEMBLY

    Click hereClick here

  27. INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY (w/o Back Door Side Garnish)

    1. B333988

      Engage the 4 clips and install the back door upper trim panel assembly.

  28. INSTALL BACK DOOR UPPER TRIM PANEL ASSEMBLY (w/ Back Door Side Garnish)

    1. B327777

      Engage the 4 clips and 4 claws, and install the back door upper trim panel assembly.