WATER PUMP INSTALLATION

PROCEDURE

  1. INSTALL ENGINE WATER PUMP ASSEMBLY

    1. A325042C01

      *a

      Protrusion

      *b

      Engine Water Pump Assembly Side

      Align the protrusion of a new water pump gasket with the cutout in the timing chain cover sub-assembly and install the water pump gasket in the groove of the timing chain cover sub-assembly.

      Tip:

      Be sure to clean the contact surfaces.

    2. A323577N01

      Install the engine water pump assembly with the 5 bolts in the order shown in the illustration.

      28 N*m

      286 kgf*cm

      21 ft.*lbf

  2. INSTALL GENERATOR ASSEMBLY

    for 80 A Type:Click here

    for 100 A Type:Click here

  3. ADD ENGINE COOLANT

    Click here

  4. INSPECT FOR COOLANT LEAK

    Click here