COMPRESSOR(for 2GR-FKS) INSPECTION

PROCEDURE


  1. INSPECT MAGNET CLUTCH ASSEMBLY (A/C LOCK SENSOR)


    1. B00864HC04
      *a

      Component without harness connected

      (Magnet Clutch Assembly (A/C Lock Sensor))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (SSR+) - 2 (SSR-) 20°C (68°F) 160 to 320 Ω

      If the resistance is not as specified, replace the magnet clutch assembly.