MULTI-MODE MANUAL TRANSAXLE ECU(for LHD) INSTALLATION

PROCEDURE

1. INSTALL TCM

   1. Install the TCM to the ECU integration box RH.

2. INSTALL ECU INTEGRATION BOX RH

   1. Install the ECU integration box RH with the 3 bolts.

      12 N*m

      122 kgf*cm

      9 ft.*lbf

   2. Connect each connector.

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover)

   Click here

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

6. PERFORM INITIALIZATION OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

   Click here

7. PERFORM LEARNING OF MULTI-MODE MANUAL TRANSAXLE SYSTEM

   Click here

8. PERFORM SYNCHRONIZATION POSITION CALIBRATION

   Click here