REAR SEAT OUTER BELT ASSEMBLY(for 5 Door) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE

  1. INSPECT NO. 1 REAR SEAT OUTER BELT ASSEMBLY

    Click here

  2. INSTALL NO. 1 REAR SEAT OUTER BELT ASSEMBLY

    1. Install the No. 1 rear seat outer belt assembly with the bolt.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

    2. Connect the shoulder anchor of the No. 1 rear seat outer belt assembly with the bolt.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

    3. Check that the ELR locks.

      Note:

      This check should be performed with the No. 1 rear seat outer belt assembly installed.

      1. With the No. 1 rear seat outer belt assembly installed, check that the belt locks when it is pulled out quickly.

  3. INSTALL INNER ROOF SIDE GARNISH

    Click here

  4. INSTALL INNER ROOF SIDE GARNISH COVER (w/o Luggage Compartment Room Light)

    Click here

  5. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (w/ Luggage Compartment Room Light)

    Click here

  6. INSTALL REAR SEAT SIDE GARNISH

    Click here

  7. CONNECT NO. 1 REAR SEAT OUTER BELT ASSEMBLY

    1. Connect the floor anchor of the No. 1 rear seat outer belt assembly with the bolt.

      42 N*m

      428 kgf*cm

      31 ft.*lbf

  8. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP

    for LH Side:Click here

    for RH Side:Click here

  9. INSTALL REAR SEAT ASSEMBLY (for Bench Seat Type)

    Click here

  10. INSTALL REAR SEAT ASSEMBLY (for Separate Seat Type)

    Click here

  11. INSTALL REAR FLOOR MAT ASSEMBLY

    Click here

  12. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

    Click here