CLUTCH SERVICE DATA
Pedal height from dash panel (for LHD) |
1NR-FE |
135.5 to 145.5 mm (5.33 to 5.73 in.) |
1ZR-FAE, 1ZR-FE, 8NR-FTS |
143.6 to 153.6 mm (5.65 to 6.05 in.) |
|
1ND-TV, 1WW |
151.8 to 161.8 mm (5.98 to 6.37 in.) |
|
Pedal height from dash panel (for RHD) |
1NR-FE |
153.4 to 163.4 mm (6.04 to 6.43 in.) |
1ZR-FAE, 8NR-FTS |
162.3 to 172.3 mm (6.39 to 6.78 in.) |
|
1ND-TV, 1WW |
171.5 to 181.5 mm (6.75to 7.15 in.) |
|
Pedal free play |
- |
5.0 to 15.0 mm (0.197 to 0.591 in.) |
Push rod play at pedal top |
- |
1.0 to 5.0 mm (0.0394 to 0.197 in.) |
Clutch release point from pedal full stroke end position |
- |
25 mm (0.984 in.) or more |
Clutch actuator (for EC65A) |
Resistance |
0.1 to 100 Ω |
Clutch disc rivet depth |
Minimum |
0.3 mm (0.0118 in.) |
Clutch disc runout |
Maximum |
0.8 mm (0.0315 in.) |
Diaphragm spring fingerwear |
Maximum depth Maximum width |
0.5 mm (0.0197 in.) 6.0 mm (0.236 in.) |
Flywheel runout (for EC60, EC69, EC65A and EA66) |
Maximum |
0.1 mm (0.00394 in.) |
Flywheel runout (for EC61) |
Maximum |
0.12 mm (0.00472 in.) |
Diaphragm spring tip non-alignment (for EC60, EC61, EC69 and EC65A) |
Maximum |
0.5 mm (0.0197 in.) |
Diaphragm spring tip non-alignment (for EA66) |
Maximum |
1.3 mm (0.0512 in.) |
Clutch pedal switch resistance |
ON (pushed) OFF (free) |
Below 1 Ω 10 kΩ or higher |
Transaxle |
Brake master cylinder sub-assembly |
Brake fluid |
EC60, EC61, EC6A, EC69 and EA66 |
Type A |
SAE J1704 or FMVSS No. 116 DOT4 |
EC60, EC61, EC6A, EC69 and EA66 |
Type B |
SAE J1703 or FMVSS No. 116 DOT3 |
Refer to the illustration to confirm the type of brake master cylinder sub-assembly.
Transaxle |
Brake fluid |
EC60, EC61, EC6A, EC69 and EA66 |
SAE J1704 or FMVSS No. 116 DOT4 |
Transaxle |
Brake fluid |
EC65A |
SAE J1704 or FMVSS No. 116 DOT 4 |